How should the geomembrane be laid and what should be paid attention to during construction?
Release time:
2023-08-16
1, before laying geomembrane should be by the civil engineering corresponding qualified acceptance documents. 2, geomembrane cutting before, should be accurate measurement of its size, and then according to the actual cutting, generally should not be cut according to the size of the drawing, should be numbered piece by piece, detailed records in the special form.
How should the geomembrane be laid and what should be paid attention to during construction?
1, before laying geomembrane should be by the civil engineering corresponding qualified acceptance documents.
2, geomembrane cutting before, should be accurate measurement of its size, and then according to the actual cutting, generally should not be cut according to the size of the drawing, should be numbered piece by piece, detailed records in the special form.
3, laying geomembrane should strive to weld less, under the premise of quality assurance, try to save raw materials. At the same time, it is also easy to ensure quality.
4, membrane and membrane joints between the lap width is generally not less than 10cm, usually so that the weld alignment direction parallel to the slope, that is, along the slope direction.
5, usually in the corner and deformed lots, should be the seam length as short as possible. In addition to special requirements, in the slope greater than 1:6 slope from the top slope or stress concentration area within 1.5 meters, as far as possible, do not set up welded seams.
6, geomembrane in the laying, should avoid artificial folds, when the temperature is low, should try to pull tight, paving.
7, geomembrane laying is completed, should minimize walking on the membrane surface, moving tools, etc., wherever the impermeable membrane can cause harm to the object, should not be placed on the membrane or carry walking on the membrane, so as not to cause accidental damage to the membrane.
It is recommended that the project pay attention to the following links:
① composite geomembrane welded as a finished product, first do the bottom of the lake mortar protective layer.
② bridge foundation waterproofing, the use of steel through the membrane welding method, with mortar protective layer to prevent welding caused by the quality of hidden problems.
③ composite geomembrane and wall adhesion, to prevent the emergence of large-scale hollow drum.
Latest News
Understanding Subsurface Drainage Geotextiles: A Key Component in Construction
Subsurface drainage geotextiles are specially designed fabrics that facilitate the efficient movement of water through soil while preventing soil erosion. These materials are typically made from synthetic fibers, ensuring durability and resistance to degradation over time. Their primary function is to separate soil layers, allowing water to flow freely while retaining the soil particles. This sepa
2025-06-29
Why Permeable Geotextile is Essential for Sustainable Construction
Why Permeable Geotextile is Essential for Sustainable Construction Table of Contents Introduction to Permeable Geotextiles What is Geotextile? Importance of Permeable Geotextile in Construction Advantages of Using Permeable Geotextiles Environmental Benefits Cost-Effectiveness Enhanced Durability Applications of Permea
2025-06-28
Understanding Geotextile Reinforcement: Essential Insights for Construction Projects
Geotextile reinforcement is a critical aspect of modern construction and landscaping techniques, particularly in the realm of soil stabilization and erosion control. Geotextiles are permeable fabrics that, when used in association with soil, can significantly improve the performance and longevity of construction projects. They are designed to provide support and reinforcement to soil structures wh
2025-06-27
The Essential Role of Geotextiles in Modern Road Construction
The Essential Role of Geotextiles in Modern Road Construction Table of Contents 1. Introduction to Geotextiles in Road Construction 2. What Are Geotextiles? 3. Types of Geotextiles Used in Construction 3.1. Woven Geotextiles 3.2. Non-Woven Geotextiles 3.3. Knitted Geotextiles 4. Benefits of Using Geotextiles in Road Construction 4.1. Enhanced Soil Stabilization 4.2. Improved Dr
2025-06-26
High-Strength Geotextile: A Key Material in Construction
High-strength geotextiles are specialized fabric materials widely used in construction and civil engineering projects. Their primary function is to provide stabilization, reinforcement, and separation in a variety of applications, particularly in soil-related projects. These durable fabrics are designed to withstand significant stress and strain, making them ideal for use in environments where tra
2025-06-25
How Woven Geotextile Can Enhance Your Construction Project
Incorporating woven geotextile into your construction project can drastically enhance soil stability, drainage, and erosion control. Its versatility in various applications—from road construction to landfill management—makes it an essential material in modern construction practices
2025-06-24
CONTACT US
Email : manager@ihygeo.com
WhatsApp : +8613153455277
Mobile : +8613153455277
GET A FREE QUOTE